Engineering & Construction
We have expertise and capabilities in the following Areas
ENGINEERING DIVISION
Engineers produce creative solutions to real world problems. The application of science to the optimum conversion of the resources of nature to the uses of humankind is our main objective. we have classified all our engineering services in six prime sectors
Electrical Studies & Surveys
Our electrical engineers are connoisseur at their studies and can conduct various surveys such as
- E-tap Modelling & Load Flow Studies
- Relay Coordination Setting
- Arc Flash Studies
- Power Factor Improvement
- Harmonic Analysis
- Short Circuit studies
- Fault Resistance
- Grounding & Bonding surveys
- Voltage Drop Calculations
- Electrical Cable Health Assessment and Surveys
- Illumination Surveys
- Lighting Design
- Electrical Protection System Studies & Design
- Underground and overhead cable laying and terminations
- LSTK/EPC projects for Electrical systems including Switchgears, MCC etc
Risk Studies & Process Design
The success of any project depends on its design and its risk analysis and we make no compromise for the best outcome.
- Building Risk Assessment (BRA)
- Facility Siting Review (FSR)
- PHA & HAZOPR Studies
- Hydraulic Calculations
- Surge Analysis for Pipelines
- Fire Risk Assessment
- Fire Fighting System Studies
- Process Simulation
- Thermal Analysis
- Process Design of all services
Piping Mechanical Equipment
We design and install piping equipment befittingly to all the norms.
- Stress Analysis in CAESSAR
- 3-D Modelling
- Piping Matrix
- Remaining Life Assessment (RLA)
- Finite Element Analysis (FEA)
- Thermal Analysis
- Heat Exchanger Design
- Tanks Design and Analysis
- Vessel Design
- Column Design
Maintenance & Operations
The efficiency depends on the product life and with our timely maintenance, we extend product life giving it more value.
- Manpower Supply of all trades
- Shut-down support
- Planning & Scheduling
- Housing Maintenance
- General Services
- Plant Maintenance Services
Reliability Studies
Our reliability of work is tested by various standard procedures such as
- RCM and RLA
- SIL Studies
- System Design and gap analysis
- Nozzles Assessment of tanks, heat exchangers and vessels
- Corrosion Allowance Assessment
- LOPA Studies
- DCS & ESD
EHSS & Surveys
We conduct surveys of the project for its acoustics and noise aspects.
- Noise Survey
- Illumination Survey
- Acoustic & thermal Studies and Surveys
- Industrial Hygiene
- Environmental Impact Assessment (EIA)
- EOP
- FEMS
- Radiation Surveys
- TLD Badges
- Topographic Survey
- Geo-Technical Surveys
CONTRACTING DIVISION
BIC is equipped with heavy-duty civil construction equipment like graders, excavators, road rollers, batch plants, concrete pumps, mixers etc. We are adept at mobilizing resources quickly, in order to meet tight schedules and have earned a reputation of producing quality works well within stringent time and budget constraints.
Civil Work
We are adept at handling heavy civil works for industrial and building projects. This expertise extends from earthworks to high-quality finishes. A complete range of expertise covers the following
- Industrial Earthwork
- Industrial Foundations work
- Industrial Structures/Buildings work
- BUILDING/SHED
- Mechanical Work
- Electrical & Instrumentation Work
Industrial Earthworks
- Site Preparation
- Soil Improvement
- Embankments & Bunds
- Water Reservoir & Channels
Services
- Underground Network for Utilities
- Drains / Channels
- Culverts / Bridges
Industrial Foundations work
- For Static Equipment
- For Rotary Equipment
- Rafts / Independent Foundations
- Piling
Industrial Structure Building
- Steel Frame Structures
- R.C.C Frame Structure
- R.C.C Shell Roofs
- Masonry Structures
Building/Shed
- Office &Industrial building.
- Renovation & Retrofitting works
- Construction of Industrial Shed
- Steel Roofing and Side Cladding
- Large Span Sheds
Mechanical Work
- Installation of Package Equipment
- Installation of stationary equipment
- Equipment Assembly and Creation
- Fabrication and Erection
- Steel Structures and Fabrication Execution
- Painting, Insulation and Refractory Works
Electrical & Instrumentation Work
We provide services for erection, testing and commissioning of power, electrical & instrumentation & control systems. BIC is primarily engaged in providing the following E&I services.
Designing, engineering, procuring, construction testing, commissioning and maintenance of industrial power distribution systems and process instrumentation consisting of
- Transformers and H.T. Switchgear.
- L.T. Switchgear, power and lighting distribution boards.
- Motor control centers.
- Relay logic controls.
- Programmable logic controls.
- Power, control and signal cables.
- Remote control centers push button stations.
- Small power distribution.
- Indoor and outdoor lighting.
- Grounding, earthing and lightning protection.
- Fire detection, alarm and other annunciation and protection systems.
- Field mounted switches and sensors.
- Back-up batteries, rectifiers and uninterrupted power supplies.
- Generating sets and associated control equipment.
- PLC, DCS and SCADA system.
- Instrument panels, cabinets, console and relay racks.
- Electronics and pneumatic instruments panel and field mounted items.
- Tubing, air supplies system, impulse and signal systems.
- Process analyzers, conductivity and pH meters.
- Control valves, solenoid valves and pressure regulators.
- Cathodic protection
Documents and drawings
Preparation of following documents and drawings
- Equipment plot plans.
- Indicative cable routing.
- Cable and termination schedules.
- Single line diagrams.
- Control logic diagrams.
- Instrument loop diagrams.
- Schematic and inter-connection diagrams.
- Lighting layouts.
- Earthing and grounding system specifications and layout drawings.
- Specifications of switchgear, panel boards, motor control centers, distribution boards.
- Specification and codes of practices for installation of electrical and control equipment.
- Specifications for generator sets and motor drives.
- Specifications & data sheets for PLC, DCS, SCADA, Control instruments, field instruments.
- Installation details of field mounted items.
- Preparation for inspection, testing, pre-commission and commissioning procedures.
- Preparation of quality control procedures.
We're ready when you are!
Contact us for information